Waxes
Wax Finishes for Lime Plasters Our range of wax finishes is specially crafted to protect and enhance lime-based surfaces Versatile lime plaster and marbleised lime plaster. Applied after the texture is complete, these waxes penetrate deeply to strengthen the surface, enrich its natural sheen, and provide long-lasting protection. From the weatherproof durability of Butter Wax for wet and exterior areas, to the soft, refined glow of Bees Wax, and the subtle, resilient finish of Aqua Wax, each formula is designed to preserve the handcrafted beauty of your surface while shielding it from moisture, wear, and the elements—without compromising breathability or texture.
From Base to Finish : ARRCOAT Guide
01
Product Overview
01
Product Overview
Arrcoat’s Venetian Plaster is a versatile decorative material made from finely blended plaster with dolomite, offering a matte effect that can also achieve glossy finishes with multiple coats. It allows for a range of effects, from subtle textures to high-shine surfaces, depending on application.
02
Surface Preparation
02
Surface Preparation
RCC / Cement Plaster
- Clean the surface and fix cracks or holes.
- Apply primer, then two coats of putty filler and one coat of acrylic putty.
- Sand, clean, and apply two to three coats of Venetian plaster, brushing between coats.
- Finish by sealing with BeeWax.
02
Surface Preparation
Plaster of Paris
- Clean the surface well.
- Apply one coat of primer.
- Apply two coats of acrylic putty, checking level each time.
- Sand and wipe clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Finish with BeeWax.
02
Surface Preparation
MDF Boards
- Inspect the board for bulges, smudges, or wetness.
- Sand with fine-grit paper and apply two coats of primer.
- Apply two coats of acrylic putty, then sand and clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Seal with BeeWax.
02
Surface Preparation
Gypsum Plaster
- Clean and dry the gypsum surface.
- Apply two coats of primer and two coats of putty, smoothing each time.
- Sand, wipe clean, and apply two to three coats of Venetian plaster.
- Seel with BeeWax.
03
Application Steps
03
Application Steps
- Start with a clean, smooth surface.
- Apply primer and putty for evenness.
- Sand after each coat.
- Finish with thin layers of Venetian Plaster.
04
After Care
04
After Care
- Wipe with a soft cloth.
- Avoid harsh chemicals.
- Use pads under furniture.
- Prevent scratches & stains.
- Avoid water exposure & re-coating on damage.