Marbleised Lime Plaster
This mixture is dug straight from the vast Indian subcontinent, now supporting nation-wide strong structures. With strong engineering, ARRCOAT’s polished plaster helps us get back our country’s lost glory in refined plastering.
Features
VOC & Adhesion
VOC & Adhesion
Test Method
VOC Content (ASTM D-3960): Nil
Result
Tensile Adhesion Strength (IS:15477-2004): 1.62 N/mm²
Inference
Eco-friendly (zero VOC)
Stain Resistance
Stain Resistance
Test Method
ASTM D1308 – Effect of Household Chemicals on Finishes (15 min open spot test, rating 1–5)
Result
Tea/Coffee: 3, Green Chutney: 3, Food Stain: 2, Tomato Sauce: 5, Oil Stain: 3, Alcohol Stain: 5
Inference
Good resistance to most stains
Scrub Resistance
Scrub Resistance
Test Method
ASTM D2486 – Standard Test Method for Scrub Resistance of Wall Paints
Result
10,000+ cycles (for PP100 and Aqua Wax)
Inference
Excellent resistance for scrubbing
Fire Resistance
Fire Resistance
Test Method
ASTM E84: Class A (Highly Fire Retarded)
Result
BS 476 Part 6 & 7: Class 0 (Will protect surface)
Inference
Excellent fire resistance properties
Impact & Hardness
Impact & Hardness
Test Method
Forward Impact: Measured in Newton-meters, Shore D Hardness (ASTM method implied)
Result
Impact: 0.34 NM, Hardness: 72 (Shore D)
Inference
Strong surface with good hardness
Our Finishes
From Base to Finish : ARRCOAT Guide
01
Product Overview
01
Product Overview
Arrcoat’s Marbelised Lime Plaster (MLP) recreates the timeless elegance of marble with natural lime and minerals. Versatile in finish: matte, satin, or glossy, it brings subtle veining, depth, and durable sophistication to walls.
02
Surface Preparation
02
Surface Preparation
RCC / Cement Plaster
- Clean the surface and fix cracks or holes.
- Apply primer, then two coats of putty filler and one coat of acrylic putty.
- Sand, clean, and apply two to three coats of Venetian plaster, brushing between coats.
- Finish by sealing with BeeWax.
02
Surface Preparation
Plaster of Paris
- Clean the surface well.
- Apply one coat of primer.
- Apply two coats of acrylic putty, checking level each time.
- Sand and wipe clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Finish with BeeWax.
02
Surface Preparation
MDF Boards
- Inspect the board for bulges, smudges, or wetness.
- Sand with fine-grit paper and apply two coats of primer.
- Apply two coats of acrylic putty, then sand and clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Seal with BeeWax.
02
Surface Preparation
Gypsum Plaster
- Clean and dry the gypsum surface.
- Apply two coats of primer and two coats of putty, smoothing each time.
- Sand, wipe clean, and apply two to three coats of Venetian plaster.
- Seel with BeeWax.
03
Application Steps
03
Application Steps
- Start with a clean, dry, even surface.
- Apply primer for strong adhesion.
- Mix plaster with colorants until smooth.
- Apply 2–3 thin coats of MLP, drying between coats.
- Finish by sealing with AquaWax
04
After Care
04
After Care
- Wipe regularly with a soft cloth.
- Use only pH-neutral cleaners (avoid harsh or acidic chemicals).
- Prevent scratches with pads under furniture.
- Clean spills immediately to avoid stains.
- Avoid standing water; recoat if damaged.