Versatile Lime Plaster
Arrcoat’s Versatile Lime Plaster is a series of three unique decorative plasters that offer various dimensions in key-utility based areas and surfaces. Their versatility comes in the form of their incredible play with light and textures. From Matt/Glossy or gleamy effect to 5 coats of various colours and textures that this material can create, it in itself depicts its diversity and impact.
Features
VOC & Adhesion
VOC & Adhesion
Test Method
VOC Content (ASTM D-3960): Nil
Result
Tensile Adhesion Strength (IS:15477-2004): 1.62 N/mm²
Inference
Zero VOC, excellent adhesion
Impact & Hardness
Impact & Hardness
Test Method
Forward Impact: 0.2 NM
Result
Shore D Hardness: 64,
Pencil Hardness: 5H+
Inference
Hard surface, moderate impact resistance
Scrub Resistance
Scrub Resistance
Test Method
ASTM D2486 – Standard test method fro scrub resistant of wall paints
Result
10000+ Cycles for VLP and Bee Wax
Inference
Excellent durability against scrubbing
Stain Resistance
Stain Resistance
Test Method
ASTM D1308 – Effect of Household Chemicals on Finishes
Result
Tea/Coffee: 5; Green Chutney: 5; Food Stain: 5; Tomato Sauce: 5; Oil: 3; Alcohol: 5
Inference
Excellent overall; slightly weaker vs. oil
Mould Resistance
Mould Resistance
Test Method
ASTM D3273 – Resistance to Mould Growth
Result
PP100: 10-10-10; PP200: 10-10-10
Inference
Highly mould-resistant
Mechanical Properties
Mechanical Properties
Test Method
Compressive Strength (ASTM C-109): 18 N/mm² (28 days),
Flexural Strength (ASTM C-580): 6 N/mm² (28 days)
Result
Water Retention (IS:2250): 93.8%,
Water-Powder Ratio: 0.48
Inference
Strong and durable
Fire Resistance
Fire Resistance
Test Method
ASTM E84: Class A
Result
BS 476 Part 6 & 7: Class 0
Inference
Superior fire protection
Our Finishes
From Base to Finish : ARRCOAT Guide
01
Product Overview
01
Product Overview
Arrcoat’s Venetian Plaster is a versatile decorative material made from finely blended plaster with dolomite, offering a matte effect that can also achieve glossy finishes with multiple coats. It allows for a range of effects, from subtle textures to high-shine surfaces, depending on application.
02
Surface Preparation
02
Surface Preparation
RCC / Cement Plaster
- Clean the surface and fix cracks or holes.
- Apply primer, then two coats of putty filler and one coat of acrylic putty.
- Sand, clean, and apply two to three coats of Venetian plaster, brushing between coats.
- Finish by sealing with BeeWax.
02
Surface Preparation
Plaster of Paris
- Clean the surface well.
- Apply one coat of primer.
- Apply two coats of acrylic putty, checking level each time.
- Sand and wipe clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Finish with BeeWax.
02
Surface Preparation
MDF Boards
- Clean the surface well.
- Apply one coat of primer.
- Apply two coats of acrylic putty, checking level each time.
- Sand and wipe clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Finish with BeeWax.
02
Surface Preparation
Gypsum Plaster
- Clean the surface well.
- Apply one coat of primer.
- Apply two coats of acrylic putty, checking level each time.
- Sand and wipe clean.
- Apply two to three coats of Venetian plaster, brushing between coats.
- Finish with BeeWax.
03
Application Steps
03
Application Steps
- 1. Start with a clean, smooth surface
- 2. Apply primer and putty for evenness
- 3. Sand after each coat
- 4. Finish with thin layers of Venetian Plaster
04
After Care
04
After Care
- Wipe with a soft cloth
- Avoid harsh chemicals
- Use pads under furniture
- Prevent scratches & stains
- Avoid water exposure & re-coating on damage